Study of highly perturbed spacecraft formation dynamics via approximation

This paper explores methods for approximating and analyzing the dynamics of highly perturbed spacecraft formations with an emphasis on computationally efficient approaches. This facilitates on-board computation or rapid preliminary mission design analysis. Perturbed formation dynamics are often approximated as linear time-varying (LTV) systems, for which Floquet theory can be used to analyze the degree of system instability. Furthermore, the angular momentum of the relative orbital state can be computed with the approximate dynamics to provide additional insight. A general methodology is developed first and then applied to the problem of unstable formation dynamics in asteroid orbits. Here the dominant perturbative effects due to low-order gravitational harmonics and solar radiation pressure are modeled. Numerical simulations validate the approach and illustrate the approximation accuracy achieved.     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

最小二乘直线函数的特性分析

证明了最小二乘直线函数是一种严格的凸函数。F(a,b)=∑(y-ax_i-b)~2是一个椭圆抛物面。a=[n∑x_iy_i-∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]和b=[∑x_i^2∑y_i-∑x_i∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]仅表示极值点。a=∑x_iy_i/∑x_i和 b=[∑x_i^2∑y_i-∑x_i∑x_iy_i]/[n∑x_i^2]在某些情况下可以是极值点,但不是在每种情况下都是极值点。     

线性规划问题的一个数值解法

通过用一组非线性方程组来逼近线性规划的Kuhn-mcker条件方程，从而将求解线性规划问题转化为一个用Newton迭代法来求解非线性方程组的问题。经数值计算表明，该算法在一般情况下能实现快速收敛。     

区域极点及方差约束下的航天器拦截控制：静态输出反馈情形

本文提出并讨论了具有选通窗约束的航天器拦截控制问题，指出航天器拦截控制的稳暂态性能指标可表现为系统稳态状态方差及闭环区域极点的形式。然后，基于配置控制的思想，本文完整地给出了期望静态反馈控制器的存在条件及其解析表达式，并举例说明所提设计方法的直接性与有效性     

机载LTPB与FDDI网络分析与比较

对ＬＴＰＢ和ＦＤＤＩ两种光纤数据总线的拓扑结构、传输协议和消息延时等特性进行了比较分析。ＬＴＰＢ总线是为航空电子系统设计的网络协议，它具有功耗低，容错能力和实时性强的特点，将成为未来飞行器上总线系统的主流。ＦＤＤＩ可支持很大的网络规模，技术成熟成本低，因此适合于大型民用机载应用环境     

某型工程车多功能检测仪的硬件设计

设计的检测仪用于检测某型工程车的电控系统,以51单片机作为中央处理单元,以MAX392多路选择器实现多路选通,以CPLD扩展外围接口,可较好地实现信号的采集、存储和信息显示等功能。检测仪还具有代用功能,在紧急情况下可代替原车电控系统进行工作。     

内喷管间隙宽度对线性塞式喷管性能的影响

为了了解内喷管间隙宽度对线性塞式喷管性能的影响，提出了对应着同一个内喷管的三种不同间隙宽度的塞锥。采用数值模拟的方法，得到了不同间隙宽度的线性塞式喷管在不同工况下的流场和性能。比较了不同间隙宽度对线性塞式喷管性能的影响，结果表明：增加内喷管间隙会增大线性塞式喷管的面积比和设计压比；内喷管间隙变宽，塞锥表面的压强下降，塞式喷管的性能下降，间隙宽度增大一倍，塞式喷管性能下降1％～3％。另外在计算过程中发现，内喷管的性能是整个线性塞式喷管性能的主要组成部分，占了整个塞式喷管性能的三分之二以上。     

VXI总线系统及在固体发动机地面试验中的应用

分析了固体火箭发动机试验测控系统的现状，提出了VXI总线系统是理想的测控系统平台的论点，并对VXI总线测控系统应用于固体火箭发动机试验测控的优势进行了阐述。     

基于FM-AM转换的伪码调相-载波调频复合引信信号的脉内特征提取研究

伪码调相和载波调频复合信号因具有好的距离、速度分辨率和测速测距精度,所以广泛应用在雷达和引信中。在电子对抗中为了实施欺骗性干扰,必须有效地提取复合信号的参数特征,为此本文研究了FM-AM转换时频分析的理论及其实现方法,并利用该方法对伪码调相-载波调频复合信号进行了脉内特征分析。具体包括伪码调相正弦载波信号、伪码调相复合正弦调频信号及伪码调相复合线性调频信号。仿真结果表明,在信噪比为5dB时,利用FM-AM转换时频分析技术,不但可以提取载波调频的特征信息,而且能够有效提取伪码的特征信息。